"Quality and Life" № 2(30) 2021



Main theme: 
Future quality is determined today


Release date: 
03.06.2021

Только зарегистрированный пользователь может получить доспуп к электронной версии журнала

QUALITY MANAGEMENT

p. 3-8

Problemal Issues of Issuing the Industrial Certificate in the Republic  of Kazakhstan and the Ways of their Solution

A.E. Beisekeev, Innovative Eurasian University; Republic of Kazakhstan, Pavlodar
e-mail: beysekeev_ieu@inbox.ru

D.S. Sviderskaya, candidate of technical sciences, associate professor, Innovative Eurasian University; Republic of Kazakhstan, Pavlodar

N.E. Kamzina, candidate of art history, PhD, Innovative Eurasian University; Republic of Kazakhstan, Pavlodar

V.A. Nozhenko, Innovative Eurasian University; Republic of Kazakhstan, Pavlodar

The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for economic development. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one, fundamentally different from the previous one. The article is devoted to problematic issues in the field of industrial certification, namely: lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; lack of automation of industrial certification mechanism processes. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues.

DOI: 10.34214/2312-5209-2021-30-2-03-08


 
p. 8-18

Model of Intelligent Assistance System Using FMEA Support System. Part 1

D.I. Panyukov, Candidate of Technical Sciences, Associate Professor, senior Researcher at Samara State Technical University; Samara

V.N. Kozlovskiy, Doctor of Technical Sciences, Professor, Head of the Department of Theoretical and General Electrotechnics at Samara State Technical University; Samara
e-mail: Kozlovskiy-76@mail.ru

The article presents the main results of the development and implementation of a corporate information system of an engineering management tool – failure modes and consequences analysis (FMEA).

 
DOI: 10.34214/2312-5209-2021-30-2-08-18
 


 
p. 19-25

Digital Technology as a Modern Tool Ensuring the Quality and Safety  of Products in the Consumer Market

E.A. Sysoeva, doctor of economic sciences, associate professor, head of the department of statistics, econometrics and IT in management of Federal State Budgetary Educational Institution of Higher Education «National Research Ogarev Mordovia State University», faculty of Economics; Republic of Mordovia, Saransk
e-mail: sysoewa@mail.ru

T.A. Rozhkova, leading specialist of the certification body of limited liability company «Center of certification of electric lamps and lighting engineering»; Republic of Mordovia, Saransk

The article discusses the use of digital technologies in technical regulation to ensure the quality and safety of products placed on the EAEU market. The procedure for buyers’ access to the databases of certificates of conformity and declarations of conformity that accompany products entering the consumer market in order to exclude the purchase of goods that have not passed the conformity assessment, which guarantees the safety of the purchased products, is described in detail by Rusaccreditation.
The article provides information on a pilot project being developed in the EAEU to form a unified system for informing buyers about hazardous products that do not meet the requirements of technical regulations. The article considers the system of national digital marking Chestny ZNAK introduced in the Russian market, which should help to improve the living standards and safety of Russians, significantly reduce the amount of counterfeit and low-quality goods, and guarantee consumers the authenticity and declared quality of products.

DOI: 10.34214/2312-5209-2021-30-2-19-25


 
p. 25-30

Study of the Factors That Have the Greatest Impact on the Quality  of the Object Based on the Planning of the Experiment

A.A. Bakenova, head of Quality Control Department of the Limited liability company «Scientific and Production Association» Science; Cheboksary

D.G. Kuanysheva, specialist of the quality assurance department of Karaganda Pharmaceutical Complex LLP; Republic of Kazakhstan, Karaganda

I.V. Plotnikova, candidate of technical sciences, associate professor of Tomsk Polytechnic University; Tomsk

L.A. Redko, candidate of technical sciences, associate professor of Tomsk Polytechnic University; Tomsk
e-mail: laredko@tpu.ru

M.N. Yanushevskaya, candidate of pedagogy, associate professor of the Tomsk State University of Control Systems and Radioelectronics; Tomsk

This article discusses the application of the method of planning an experiment to determine the factors that affect the quality of an object using the example of preparing a culinary product. A fractional factorial experiment was applied, insignificant factors were identified, a mathematical model was drawn up and its adequacy was checked. This experiment made it possible to change all factors simultaneously and to minimize the number of experiments.

 
DOI: 10.34214/2312-5209-2021-30-2-25-30


 
р. 31-36

Self-Assessment of the Quality Management System for Compliance  with GOST R ISO 9004-2010 on the Example of a Medical Institution

N.V. Astakhova, Master’s student of Kemerovo State University; Kemerovo

Yu.V. Ustinova, Candidate of Technical Sciences, Associate Professor of the Department «Quality Management» of Kemerovo State University; Kemerovo
e-mail: yul48888048@yandex.ru

E.O. Ermolaeva, Doctor of Technical Sciences, Professor of the Department «Quality Management» of Kemerovo State University; Kemerovo

This work is devoted to conducting  a self-assessment of the QMS for compliance with GOST R ISO 9004-2010 on the example of a medical institution in the Kemerovo region. A self-assessment of the QMS was carried out, using the results obtained,  a petal diagram was constructed and the level of maturity of the institution was determined. The result of the self-assessment was the identification of priority areas of impact that will be used for planning activities, their subsequent implementation and monitoring.

 
DOI: 10.34214/2312-5209-2021-30-2-31-36


 
р. 37-43

Improving the Efficiency of the Control Chart Using Fuzzy Sets

Pham Van Tu, Graduate Student of the Department of Metrology and Standardization at RTU MIREA; Moscow
e-mail: anhtutula.king@gmail.com

A.N. Chesalin, Candidate of Technical Sciences, Associate Professor of Department of Computer and Information Security at RTU MIREA; Moscow

Ya.S. Grodzenskiy, Candidate of Technical Sciences, Associate Professor of Metrology and Standardization of RTU MIREA; Moscow

I.V. Emanakov, Deputy Head of Department of the Federal State Unitary Enterprise «All-Russian Scientific Research Institute «Center»; Moscow

The problem of control of technological processes in the presence of fuzzy information is investigated. The method of forming fuzzy sets based on confidence intervals for constructing fuzzy control maps is considered. The rules and algorithms for adaptive control of the stability of technological processes for the production of high-tech products in fuzzy environments based on the use of fuzzy control maps are formulated.

 
DOI: 10.34214/2312-5209-2021-30-2-37-43
 


 

QUALITY OF LIFE

р. 44-50

Comprehensive Scientific Research Aimed  at Preserving the Cultural Heritage of V.G. Shukhov

A.N. Mamin, Doctor of Technical Sciences, Professor, Moscow State University of Civil Engineering; Head of the Department of Surveys of Buildings and Structures No. 1 of JSC «Tsniipromzdaniy»; Moscow

V.V. Bobrov, Candidate of Technical Sciences, Associate Professor of the Department of Reinforced Concrete and Stone Structures of the Moscow State University of Civil Engineering; Leading Researcher of the Department of Surveys of Buildings and Structures No. 1 of JSC «Tsniipromzdaniy»; Moscow

D.S. Shavelkin, Senior Lecturer, Moscow Aviation Institute (NRU); Moscow

T.V. Dolgova, Candidate of Technical Sciences, Associate Professor, Department 101 of the Moscow Aviation Institute (NRU); Moscow
e-mail: mai-dolgova@yandex.ru

The article deals with unique, high-quality, high-resource objects of cultural heritage – the Radio Tower of V. G. Shukhov on Shabolovka (Moscow), the Water Tower and the «Shukhov Span» of the Sheet-Rolling Shop in Vyksa, Nizhny Novgorod region, the structures of which are currently in an emergency or limited working condition and an immediate set of measures is required to preserve them.. The article presents the history of the creation and operation of these objects, their main technical characteristics, methods and results of their technical inspection, as well as restoration projects developed on the basis of comprehensive scientific research.

 
DOI: 10.34214/2312-5209-2021-30-2-44-50


 
р. 50-56

A New Paradigm for Ensuring the Quality of Life  in the Conditions of «Mental War»

V.L. Balanovsky, president of the Department of the Academy of Quality Problems «Integrated Security»; Moscow
e-mail: tishkova_l_f@inbox.ru

V.M. Podyakonov, PhD in Historical Sciences, researcher of the Military University of the Ministry of Defense of the Russian Federation; Moscow

The article explores the issues of evaluating vulnerability of the humanitarian sphere of information security of the Russian Federation towards to a complex of multilevel technologies of network «controlled chaos», treated as an intruder acting in the form of a «soft» impact; determining the conditions for improving the quality of life by creating a favorable moral and psychological state of the population.

  
DOI: 10.34214/2312-5209-2021-30-2-50-56


 

ORGANIZATION OF PRODUCTION

р. 57-59

Modern Digital Technologies and Digital Twin

M.L. Rakhmanov, Doctor of Technical Sciences, professor of Department 104 «Technological Design and Quality Management» of Moscow Aviation  Institute (NRU); Moscow

A.V. Shishkin, Chief Specialist of JSC RSK MiG of the Department of Formation of Maintenance of the Database of Electronic Documentation, Postgraduate Student of Department 104 «Technological Design and Quality Management» of Moscow Aviation Institute (NRU); Moscow
e-mail: 17andrew07@gmail.com

The problem of using information technologies at the stages of the product life cycle plays a key role in the development of industrial production and the economy of the Russian Federation. Modern digital concepts, such as the digital twin, which uses virtual and augmented reality technology, allow you to optimize the production processes of the product in order to improve its quality and reliability. The article discusses and describes different combinations of interaction of the digital twin with other technologies.

DOI: 10.34214/2312-5209-2021-30-2-57-59


 

TECHNOLOGY AND EQUIPMENT

р. 60-65

Formation of Advanced Security Systems for Information Technology Communication and Information Security Facilities

A.F. Prokopchuk, Head of Communications and Information Security Department of the Ministry of Internal Affairs of Russia in Moscow; Moscow
e-mail: tishkova_l_f@inbox.ru

This article describes the process of improving the security of high-security facilities, which operates with confidential information in the face of new threats and risks using innovative technical solutions of security systems.

 
DOI: 10.34214/2312-5209-2021-30-2-60-65


 

TRANSPORT

р. 66-79

Problems of Ensuring the Safety of the Aviation Transport System when Helicopter Flight Parameters are out of Range

A.I. Resinets, Candidate of military sciences, associate professor «Design of helicopters» of the Moscow Aviation Institute (NRU); Moscow
e-mail: k102@mai.ru

B.L. Artamonov, Candidate of Technical Sciences, Senior Researcher, Associate Professor of the Department «Helicopter Design» of the Moscow Aviation Institute (NRU); Moscow

A.A. Resinets, Head of the Department of JSC «NCV Mil and Kamov»; Moscow

The article explores the problematic issues related to ensuring the safety of the aviation transport system when its elements are out of range. Recommendations are given to the flight and engineering staff on the maximum use of the available flight characteristics of helicopters while maintaining a high level of flight safety.

 
DOI: 10.34214/2312-5209-2021-30-2-66-79


 
р. 80-85

Some Aspects of Ensuring Transport Security

V.V. Denisov,  Candidate of Military Sciences, Associate Professor of the Department «Integrated Security and Special Programs» of RUT (Russian University of Transport); Moscow

V.L. Balanovsky, president of the Department of the Academy of Quality Problems «Integrated Security»; Moscow
e-mail: tishkova_l_f@inbox.ru

This article devoted to standardization issues in the field of transport security at transport infrastructure facilities.

 
DOI: 10.34214/2312-5209-2021-30-2-80-85
 


 

TRANSPORT

p. 85-90

Quality Management in Transport Security Solutions

V.V. Denisov,  Candidate of Military Sciences, Associate Professor of the Department «Integrated Security and Special Programs» of RUT (Russian University of Transport); Moscow

V.L. Balanovsky, president of the Department of the Academy of Quality Problems «Integrated Security»; Moscow
e-mail: tishkova_l_f@inbox.ru

This article devoted to decision-making systems in the field of information security at transport infrastructure facilities.

 
DOI: 10.34214/2312-5209-2021-30-2-85-90


 

COMPOSITE MATERIALS

р. 91-96

Research of the Effectiveness of the Introduction a Laser Projection System in the Process of Technological Preparation  for the Production of Aircraft Structures from of Polymer Composite Materials

V.I. Bakhmetyev, Candidate of Technical Sciences, Associate Professor of the Sergo Ordzhonikidze Aviation Institute of Moscow (NRU); Moscow
e-mail: wiat109@yandex.ru

N.I. Fokin, Senior Lecturer of the Sergo Ordzhonikidze Aviation Institute of Moscow (NRU); Moscow

The results of an applied study of the effectiveness of laser technologies in the automation of technological preparation of serial production of aircraft structures of polymer composite materials are presented.

DOI: 10.34214/2312-5209-2021-30-2-91-96